|
Frequently asked Questions
Q. What exactly is D’ziner Snow? What makes it unique?
A. D’ziner Snow is a unique polymer bead in powder form. When mixed with water it takes on the appearance of Snow. This bead is unique because once it has been fully hydrated it has the characteristics of snow.
Q. What is the best way to make D'ziner Snow up?
A. To acheive the best results it is recommended that D'ziner Snow be mixed and stirred in a clean container or bucket first and then used for the desired purpose or effect.
Q. Can I sprinkle it on my lawn and then spray with water to make it up?
A. It is not recommended that you make your snow like this unless the desired effect you are after is a frosty look. Using this method will result in a lot of powder going to waist.
Q. What uses does it have?
A. Use D'ziner Snow to create exciting and novel effects, especially " out of season" and at Christmas time. Uses could include:
· Decorating entrances.
· Window displays
· Creating highlights at weddings and functions
· Features at parties, displays, trade exhibitions etc
· Creating special effects in theatres, concerts, galas, etc
· Use for hobbies and holiday fun
· Decorating buffets, use for carved statues
· Dusting trees and other features to create snow effects
You can create attractive features by using sealed lights (e.g. rope lights) in D'ziner Snow.
Q. How do you make up D’ziner Snow?
A. Use clean tap water (rain water yields best results) for a measured amount. One litre of water makes one litre of artificial snow. Add D'ziner Snow powder stirring in gradually for 3 to 4 minutes. Add powder in the ratio of 3 -4 rounded teaspoons per litre of water according to the density of snow required. Snow is produced in 2 to 3 minutes.
D’ziner Snow is supplied in 2 pack sizes
190 grams – makes between 30 – 40 litres of snow
I kilogram - makes between 150 - 200 litres of snow
Please note that the maximum rate of hydration is approximately 1:300.
Q. How do I dispose of the snow after use?
A. Once you have finished with your snow it can be shoveled, swept or vacuumed up. Because of its structure the D'ziner Snow makes an excellent water saver and soil conditioner as it will tend to retain moisture and nutrients. So it's a good idea to give your plants a treat and dispose of it in any garden, lawn or pot soil.
Q. Will it stain or smell?
A. No D'ziner Snow will not stain and has no odour. Once D'ziner Snow is fully hydrated with clean water it is 99% water thus having no smell or taste.
Q. How safe is D’ziner Snow ?
Naturally Australians are not often exposed to snow in any form so you need to exercise sensible safeguards to ensure you have FUN without placing you or others at risk.
· The base component of the powder is similar to that found in a baby’s nappy. D’ziner Snow is safe to handle, non toxic & bio-degradable. This product does not bio accumulate and should never be dumped into a landfill when finished with. This product should always be placed into the ground as it is a great water retainer and will breakdown over several years.
· D’ziner Snow won’t stain sealed surfaces. But avoid placing on untreated timber or other degradable surfaces – especially those with a high degree of absorbency.
· It can be safely used as a decoration around food.
· D’ziner Snow is non toxic and biodegradable thus making it non harmful for use around children and animals. If swallowed the acid in the stomach will make the beads release the water and the bead will be passed through. D’ziner Snow should not pose any health or medical problem. However you should never encourage deliberate consumption of this product as any form of stunt, competition etc.
· Do be careful when placing D'ziner Snow in places where people will be walking, make sure that there is substantial traction in the ground surface, and the area is not adjacent to polished or glazed surfaces. It is important that you exercise care in the location of D’ziner Snow in any walkways. We recommend that as an alternative you use D’ziner Snow as a feature beside walkways and at entrances.
Q. How long will the snow last?
A. D'ziner Snow will dry out over time. It have good durability:
Outdoors - D’ziner snow changes its characteristics when exposed to UV light in a very short time period. It is advisable that if the product is to be exposed to UV light then keep this period as short as possible and dump the product into the garden or lawn. It can not be dehydrated and reused once it has been exposed to direct sunlight.
Indoors – D’ziner Snow will last several years as long as the product is well looked after and kept free of contaminants.
D'ziner Snow can be frozen and carved to create statues, snowmen etc. We recommend that you experiment with a quantity of formulated D'ziner Snow before attempting any major or regular applications. Please remembe that water expands when it is frozen and this could potentially damage the polymer beads which are the basis of the product.
Q. How do you decorate surfaces like trees?
A. Use a fine water spray to cover areas for decoration. Dust D’ziner Snow powder over the area and then cover with a mist of the water spray to create artificial snow. Tree may need to be sprayed every day or two as snow starts to shrink.
Q. How do I dispose of the snow after use?
A. Because of its structure the D'ziner Snow makes an excellent soil conditioner as it will tend to reatain moisture and nutrients. So, it's a good idea to give your plants a treat and dispose of it in any garden, lawn or pot soil.
Q. How do I store D’ziner Snow after use?
A. If D'ziner snow has been looked after and kept clean and out of direct sunlight you can store it by placing it in a pail and sealing it. D'ziner Snow can be dried out and it reverts back to nearly powder form and can be re-constituted as snow when required. This process can not be sped up as the water needs to evaporate from the beads at its own speed, this could take up to several months, depending on a few factors such as, storage, outside temperature and how much snow has been made up.
Further Questions?
Visit us at www.polymerinnovations.com.au
Contact us Polymer Innovations
P.O. Box 431
SINGLETON NSW 2330
Ph: 02 6571 5177
 |